Van De Leur 402 Specifications download pdf (Page 5)

Manual Van de Leur Audio 402

The inputs consist of balanced (XLR) or unbalanced (RCA) connections. Use the switch

between the inputs to select the right input. When not selected correctly, there will be no

audible sound. We recommend to only use the switch while having the amplifier turned off.

Only one input can be used at once.

The loudspeaker terminals can be found on each side of the rear panel. These are fully

silver plated output terminals. We recommend the use of banana- or spade-plugs. Make sure

the connection is tight and safe. Avoid shortage caused by connecting + to -. This may result

in serious damage to your amplifier.

Switching on or off

Please refrain from switching off the attached source, before switching off the power

amplifier. The attached source might spike the signal up to a dangerous level when being

switched off. This may result in damage to your power amplifier and loudspeaker. Always

switch off the power amplifier first.

In the event of dangerous input signal in the power amplifier, the security switches the

power amplifier off automatically. When this occurs, fully switch off all equipment, including

the power amplifier. Make sure the source of the engaged security is neutralized and let the

power amplifier remain switched off for five (5) minutes. After this procedure, your power

amplifier should be operating normally.

The security ‘kick-in’ can be recognized by an audible ‘click-sound’, not being confused with

the click heard when switching the amplifier on. If the amplifier remains in security-phase,

please contact your supplier.

1 2 3 4 5 6 7 8 9

No comments

Van De Leur 402 Specifications Page 5